Below is a brief explanation of the most common methods of air filtration in use today.
Straining - The most basic form of filtration, the particle is larger than the space between two fibres, and so, cannot follow the airstream through and is captured.
Impingement - The mechanism by which large, high density particles are captured is called impingement. As the particulate laden air passes through the filter media, the air tends to pass around the fibres. Inertia of the particulate causes it to separate from the airstream to collide with the fibres to which they become attached.
Diffusion - occurs specifically with the very small particles which follow irregular patterns, in a manner similar to gases, and not necessarily following the airstream. This irregular pattern is known as Brownian motion and increases the particles chance of capture through contact with the fibres.
Interception - Only found in synthetic filters, interception occurs when a particle follows the airstream but still attaches itself to the fibre as it passes around it. This is due to the electrostatics force attracting the particle towards the fibre where it is retained.
Latest News View All
Visit MANN+HUMMEL @ NexTurbine...
Visit MANN+HUMMEL at NexTurbine®2017 The 6th Annual Summit | 17-18...Read More
Infographic: Air Filtration...
MANN+HUMMEL VOKES AIR has created a new infographic exploring the world...Read More
Vokes Air - Now a part of...
On February 14th 2014, Vokes Air was acquired by the MANN+HUMMEL Group...Read More
Did you know?
Our U17 ULPA filter has an efficiency of 99.999995%. If you equated the World’s population of 6.9 billion people with particles and asked them to walk through our U17 filter, only 345 people would reach the other side.